Bell Arm Mounting Errata
Posted: Sun Jun 23, 2024 9:14 pm
Page 12 indicates the Bell arm to be attached via M2 Locknut, however the daughter board as received has a threaded insert in the board now. No issues... just one for the errata sheet. (screen caps for clarity)
(holding the daughter board... with bell arm mounted to threaded insert.
- Screenshot 2024-06-23 at 2.06.14 PM.png (175.43 KiB) Viewed 14104 times
- Screenshot 2024-06-23 at 2.10.58 PM.jpg (159.8 KiB) Viewed 14104 times